Skip to content
FL Wells

Place · Marion County

How deep are wells in Belleview?

Household (domestic) wells in Belleview have a median reported depth of 110 ft. The middle half are between 90 ft and 135 ft, based on 94 SJRWMD and SWFWMD records.

Typical household well

Reported total depth, feet below ground

0 ft50100150200ground surfaceCasing ~87 ftmedian cased depthMedian 110 fthalf are shallower90–135 ftmiddle half of wells

Depth by well type

Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.

Reported well depth by well type
Well typeWellsMedianMiddle half
Household (headline figure)94110 ft90–135 ft
Irrigation49130 ft100–150 ft
Public supply7150 ft105–265 ft
All water-supply151120 ft100–145 ft

How depths are spread

Household (domestic) wells: number of wells per depth band (ft)

01020300–20 ft: 1 well20–40 ft: 0 wells40–60 ft: 1 well60–80 ft: 12 wells80–100 ft: 12 wells100–120 ft: 25 wells120–140 ft: 21 wells140–160 ft: 11 wells160–180 ft: 7 wells180 ft or deeper: 4 wells04080120160median 110 ft
Show as table
DepthWells
0–20 ft1
20–40 ft0
40–60 ft1
60–80 ft12
80–100 ft12
100–120 ft25
120–140 ft21
140–160 ft11
160–180 ft7
180 ft or deeper4

Look up wells near a specific address

Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.

Or browse every well around the center of Belleview →

About these numbers

  • Sources: St. Johns River Water Management District (179 records); Southwest Florida Water Management District (25 records). Records were fetched October 25, 2026.
  • What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
  • Dates: SWFWMD permits issued 2006–2024. The SJRWMD layers carry no date.
  • Approximate locations: 91 of 204 records (45%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
  • Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.

Questions

How deep are wells in Belleview?
Household (domestic) wells in Belleview have a median reported depth of 110 ft. The middle half are between 90 ft and 135 ft, based on 94 SJRWMD and SWFWMD records.
Will a new well at my property in Belleview be this deep?
Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
Where does this data come from?
From public well-construction records published by the St. Johns River Water Management District and Southwest Florida Water Management District. Each well in the lookup links to its original agency record.