Skip to content
FL Wells

Place · Levy County

How deep are wells in Bronson?

Household (domestic) wells in Bronson have a median reported depth of 115 ft. The middle half are between 82 ft and 140 ft, based on 36 SWFWMD and SRWMD records.

Typical household well

Reported total depth, feet below ground

0 ft50100150200ground surfaceCasing ~105 ftmedian cased depth82–140 ftmiddle half of wellsMedian 115 fthalf are shallower

Depth by well type

Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.

Reported well depth by well type
Well typeWellsMedianMiddle half
Household (headline figure)36115 ft82–140 ft
Irrigation6115 ft83–135 ft
Public supply4—too few
All water-supply48115 ft82–140 ft

How depths are spread

Household (domestic) wells: number of wells per depth band (ft)

05100–20 ft: 1 well20–40 ft: 0 wells40–60 ft: 0 wells60–80 ft: 6 wells80–100 ft: 5 wells100–120 ft: 8 wells120–140 ft: 5 wells140–160 ft: 6 wells160–180 ft: 3 wells180 ft or deeper: 2 wells04080120160median 115 ft
Show as table
DepthWells
0–20 ft1
20–40 ft0
40–60 ft0
60–80 ft6
80–100 ft5
100–120 ft8
120–140 ft5
140–160 ft6
160–180 ft3
180 ft or deeper2

Look up wells near a specific address

Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.

Or browse every well around the center of Bronson →

About these numbers

  • Sources: Southwest Florida Water Management District (34 records); Suwannee River Water Management District (17 records). Records were fetched October 25, 2026.
  • What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
  • Dates: SWFWMD permits issued 1984–2025. The SRWMD layers carry no date.
  • Approximate locations: 17 of 51 records (33%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
  • Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.

Questions

How deep are wells in Bronson?
Household (domestic) wells in Bronson have a median reported depth of 115 ft. The middle half are between 82 ft and 140 ft, based on 36 SWFWMD and SRWMD records.
Will a new well at my property in Bronson be this deep?
Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
Where does this data come from?
From public well-construction records published by the Southwest Florida Water Management District and Suwannee River Water Management District. Each well in the lookup links to its original agency record.