Place · Hillsborough County
How deep are wells in Ruskin?
Household (domestic) wells in Ruskin have a median reported depth of 210 ft. The middle half are between 185 ft and 245 ft, based on 681 SWFWMD records.
Typical household well
Reported total depth, feet below ground
Depth by well type
Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.
| Well type | Wells | Median | Middle half |
|---|---|---|---|
| Household (headline figure) | 681 | 210 ft | 185–245 ft |
| Irrigation | 208 | 220 ft | 180–300 ft |
| Public supply | 41 | 225 ft | 200–300 ft |
| All water-supply | 953 | 210 ft | 185–260 ft |
How depths are spread
Household (domestic) wells: number of wells per depth band (ft)
Show as table
| Depth | Wells |
|---|---|
| 0–25 ft | 1 |
| 25–50 ft | 1 |
| 50–75 ft | 5 |
| 75–100 ft | 8 |
| 100–125 ft | 16 |
| 125–150 ft | 21 |
| 150–175 ft | 69 |
| 175–200 ft | 131 |
| 200–225 ft | 187 |
| 225–250 ft | 76 |
| 250–275 ft | 67 |
| 275–300 ft | 50 |
| 300–325 ft | 31 |
| 325 ft or deeper | 18 |
Look up wells near a specific address
Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.
About these numbers
- Sources: Southwest Florida Water Management District (961 records). Records were fetched October 25, 2026.
- What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
- Dates: SWFWMD permits issued 1970–2026.
- Approximate locations: 458 of 961 records (48%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
- Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.
Questions
- How deep are wells in Ruskin?
- Household (domestic) wells in Ruskin have a median reported depth of 210 ft. The middle half are between 185 ft and 245 ft, based on 681 SWFWMD records.
- Will a new well at my property in Ruskin be this deep?
- Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
- Where does this data come from?
- From public well-construction records published by the Southwest Florida Water Management District. Each well in the lookup links to its original agency record.