Skip to content
FL Wells

Place · Pinellas County

How deep are wells in Treasure Island?

All water-supply wells in Treasure Island have a median reported depth of 140 ft. The middle half are between 24 ft and 160 ft, based on 167 SWFWMD records.

Typical water-supply well

Reported total depth, feet below ground

0 ft100200300ground surface24–160 ftmiddle half of wellsCasing ~105 ftmedian cased depthMedian 140 fthalf are shallower

Depth by well type

Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.

Reported well depth by well type
Well typeWellsMedianMiddle half
Household4—too few
Irrigation163140 ft24–160 ft
All water-supply (headline figure)167140 ft24–160 ft

How depths are spread

All water-supply wells: number of wells per depth band (ft)

020400–20 ft: 32 wells20–40 ft: 17 wells40–60 ft: 0 wells60–80 ft: 0 wells80–100 ft: 2 wells100–120 ft: 4 wells120–140 ft: 27 wells140–160 ft: 40 wells160–180 ft: 24 wells180–200 ft: 13 wells200 ft or deeper: 8 wells04080120160200+median 140 ft
Show as table
DepthWells
0–20 ft32
20–40 ft17
40–60 ft0
60–80 ft0
80–100 ft2
100–120 ft4
120–140 ft27
140–160 ft40
160–180 ft24
180–200 ft13
200 ft or deeper8

Look up wells near a specific address

Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.

Or browse every well around the center of Treasure Island →

About these numbers

  • Sources: Southwest Florida Water Management District (179 records). Records were fetched October 25, 2026.
  • What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
  • Dates: SWFWMD permits issued 1979–2026.
  • Approximate locations: 48 of 179 records (27%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
  • Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.

Questions

How deep are wells in Treasure Island?
All water-supply wells in Treasure Island have a median reported depth of 140 ft. The middle half are between 24 ft and 160 ft, based on 167 SWFWMD records.
Will a new well at my property in Treasure Island be this deep?
Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
Where does this data come from?
From public well-construction records published by the Southwest Florida Water Management District. Each well in the lookup links to its original agency record.