Skip to content
FL Wells

Place · Brevard County

How deep are wells in West Melbourne?

Household (domestic) wells in West Melbourne have a median reported depth of 63 ft. The middle half are between 57 ft and 70 ft, based on 158 SJRWMD records.

Typical household well

Reported total depth, feet below ground

0 ft255075100ground surfaceCasing ~61 ftmedian cased depthMedian 63 fthalf are shallower57–70 ftmiddle half of wells

Depth by well type

Household wells are the headline because that’s what most people planning a well need. Irrigation wells are often much shallower.

Reported well depth by well type
Well typeWellsMedianMiddle half
Household (headline figure)15863 ft57–70 ft
Irrigation2,74080 ft70–295 ft
Public supply674 ft73–79 ft
All water-supply2,90577 ft70–285 ft

How depths are spread

Household (domestic) wells: number of wells per depth band (ft)

025507510–20 ft: 1 well20–30 ft: 3 wells30–40 ft: 4 wells40–50 ft: 5 wells50–60 ft: 36 wells60–70 ft: 64 wells70–80 ft: 31 wells80–90 ft: 3 wells90–100 ft: 1 well100–110 ft: 1 well110–120 ft: 2 wells120 ft or deeper: 7 wells1030507090110median 63 ft
Show as table
DepthWells
10–20 ft1
20–30 ft3
30–40 ft4
40–50 ft5
50–60 ft36
60–70 ft64
70–80 ft31
80–90 ft3
90–100 ft1
100–110 ft1
110–120 ft2
120 ft or deeper7

Look up wells near a specific address

Area figures blend very different places. For the wells closest to a property, with links to each original record, search an address.

Or browse every well around the center of West Melbourne →

About these numbers

  • Sources: St. Johns River Water Management District (3,211 records). Records were fetched October 25, 2026.
  • What’s counted: wells with a reported depth whose use is household, irrigation, public supply or agricultural. Monitoring wells, injection wells, plugged wells and permits that were never drilled are left out. Methodology.
  • Dates: the source layer for this area publishes no construction or permit date, so we can’t say how recent these wells are.
  • Approximate locations: 898 of 3,211 records (28%) share their exact map point with at least four other records, so they’re probably placed at a section, subdivision or parcel-group center rather than at the well. That matters for “nearest well” distances, less for area figures like these.
  • Not a guarantee: a record shows how deep one well was permitted or built. It doesn’t predict yield, water quality or what your well will need.

Questions

How deep are wells in West Melbourne?
Household (domestic) wells in West Melbourne have a median reported depth of 63 ft. The middle half are between 57 ft and 70 ft, based on 158 SJRWMD records.
Will a new well at my property in West Melbourne be this deep?
Not necessarily. These are depths other wells were permitted or built to. Depth depends on the aquifer, water quality, use and local rules. A Florida-licensed water well contractor and your water management district can tell you what a new well at your property needs.
Where does this data come from?
From public well-construction records published by the St. Johns River Water Management District. Each well in the lookup links to its original agency record.